Loading

Commenti Help with just opened older figure

  • Heating her feet with hot water before placing on the base worked. Even then it still took a bit of force.

    As for the shiny areas, I tried an alcohol-free wet wipe but it didn't help. My dad thinks it can't be removed. Luckily the plastic wrap was only on the back of the figure, so you don't notice it on display. Even when she is turned around, you can only see the shiny areas if you look really close. I'm going to leave her alone now. There's a bigger chance of me causing damage than fixing a minor blemish.

    Thanks for the advice everyone! This figure looks absolutely amazing <3
    7 anno/i fa
    Amidora Nope.
    The instructions say that if it's hard to insert the pegs, heat up the grayed area of the feet using hot water (60 ~ 70 Celsius), then try inserting again. (I assume using a hair dryer works as well, but I'm not sure so someone else would have to confirm or deny that)
    7 anno/i fa
    Lexiy The WCF Aficionado
    My girl uses all the time on me and it has never burnt me. So yea, no alcohol laawll

    Cantisama7 anno/i fa#1361502Looks like I'm not the only one having trouble with Motoko's base:
    comment/1226559
    comment/352463
    I would be afraid to file the pegs. The figure comes with a little instruction sheet about putting her on the base (in Japanese, of course). I've added a pic of the instructions above if someone would be kind to translate :3 Seems to describe heating the legs and/or feet.
    Don't those contain alcohol? I thought that would hurt the figure.
    7 anno/i fa
    Looks like I'm not the only one having trouble with Motoko's base:
    comment/1226559
    comment/352463

    Seasonreaper7 anno/i fa#1361389Best way of dealing with the peg issue is to take a modelling file to them...
    I would be afraid to file the pegs. The figure comes with a little instruction sheet about putting her on the base (in Japanese, of course). I've added a pic of the instructions above if someone would be kind to translate :3 Seems to describe heating the legs and/or feet.

    Lexiy7 anno/i fa#1361318Try using a wet wipe or a wet towel on those sticky plastic areas.
    Don't those contain alcohol? I thought that would hurt the figure.
    7 anno/i fa
    Best way of dealing with the peg issue is to take a modelling file to them. They'll be inside her feet so it doesn't matter if they're all scuffed up with file marks and it'll make your life a lot easier.

    Just be careful to avoid using too much force or making them too thin, I'd recommend checking to see whether they fit after every 5 seconds or so of filing to ensure you get pegs which are not too loose.
    7 anno/i fa
    Lexiy The WCF Aficionado
    Try using a wet wipe or a wet towel on those sticky plastic areas.
    7 anno/i fa
  • 6 commenti
Anime, Figures and Manga For Less!